Weapon Specifications


Re: Weapon Specifications

Postby Zedulon » Sun Sep 27, 2009 10:02 pm

"Real automata don't feel pain."
User avatar
Zedulon
 
Joined: Wed Sep 09, 2009 9:12 pm


Re: Weapon Specifications

Postby Cedrick_Blackburn » Mon Sep 28, 2009 8:34 am

I had a flashlight this past event, and will again next unless something happens (like I forget) but one of the modes is a bright blue LED, I was walking around with someone after game off and we found a bunch of darts for just a few minutes of looking
User avatar
Cedrick_Blackburn
 
Joined: Mon Jun 22, 2009 11:45 am


Re: Weapon Specifications

Postby James perkins » Tue Sep 29, 2009 10:58 pm

Is there any reson why we can not uesd Nerf firefily
James perkins
 
Joined: Thu Sep 24, 2009 9:49 pm


Re: Weapon Specifications

Postby Zedulon » Thu Oct 01, 2009 1:32 am

So I've played around with UV LED's, and a dart-finder is certainly possible. The orange foam of your basic Nerf dart fluoresces nicely under enough UV light. And if I pulse the LEDs the darts blink on the ground, while saving battery power... Now I just have to figure out how to tune the damn thing without going blind. And how to package it in a steampunky package.
"Real automata don't feel pain."
User avatar
Zedulon
 
Joined: Wed Sep 09, 2009 9:12 pm


Re: Weapon Specifications

Postby C'kaj » Sun Oct 04, 2009 2:42 pm

Question!

What would be a legal and thin construction for a rapier?
I have read the rules and it only really confused me, and anything that's built on 1/2" PVC seems unwieldy at best. :(

Is it possible to perhaps make one with these instructions?
User avatar
C'kaj
 
Joined: Wed Sep 30, 2009 1:35 am


Re: Weapon Specifications

Postby Thomas Cribb » Sun Oct 04, 2009 2:55 pm

Thomas Cribb
User avatar
Thomas Cribb
 
Joined: Fri Sep 25, 2009 2:11 am
Location: Stoneham


Re: Weapon Specifications

Postby Jacob » Sun Oct 04, 2009 3:28 pm

Three Points:


1) Crush tips are mandatory. A crush tip, in my mind, is defined as "a piece of open cell (NOT CLOSED CELL) foam that is approximately as thick as a standard duct tape roll that is securely affixed to the stabbing tip of a weapon and riddled with air release holes."

2) All striking/stabbing surfaces must be larger around than a human eye socket. In a perfect world, eye gouging with a boffer weapon would be physically impossible.

3) The closed cell foam on striking surfaces should be 5/8" thick, not 1/2" thick.

We realize that this unfortunately limits some aesthetic developments in the boffer arms race, but safety is our primary concern.
User avatar
Jacob
Plot
 
Joined: Sat Nov 22, 2008 11:58 am


Re: Weapon Specifications

Postby C'kaj » Sun Oct 04, 2009 3:45 pm

Okay, all of that will be taken into account.
A workable model is being developed! :idea:
User avatar
C'kaj
 
Joined: Wed Sep 30, 2009 1:35 am


Re: Weapon Specifications

Postby Zedulon » Sun Oct 04, 2009 11:12 pm

"Real automata don't feel pain."
User avatar
Zedulon
 
Joined: Wed Sep 09, 2009 9:12 pm


Re: Weapon Specifications

Postby Thomas Cribb » Mon Oct 05, 2009 1:09 am

Thomas Cribb
User avatar
Thomas Cribb
 
Joined: Fri Sep 25, 2009 2:11 am
Location: Stoneham

PreviousNext

Return to Board index

Return to OOG Discussion

Who is online

Users browsing this forum: No registered users and 2 guests

cron